Intra-community supply
Goods go to a business in another EU member state: the supply is VAT-exempt in
Germany, and the customer pays VAT on the acquisition in their own country. In
the e-invoice that means category K, VAT rate 0 %, exemption
reason VATEX-EU-IC – and, unlike reverse charge, also the
delivery country and delivery date.
German VAT law. The legal basis is § 4 no. 1(b) and § 6a of the German VAT Act (Umsatzsteuergesetz, UStG) as well as Art. 138 of the EU VAT Directive (2006/112/EC). This page shows the technical representation in the e-invoice; it is not tax advice.
The document is the counterpart to the reverse charge invoice: the same sample companies, only goods instead of a service. It has been validated against the EN 16931 rules: valid, no warnings.
Intra-community supply or reverse charge?
At first glance both cases look the same: customer in another EU member state,
no VAT on the invoice. Whether K or AE is right depends
on what is supplied – goods or a service. For goods, EN 16931 is
stricter.
What both documents have in common:
- The customer is a business in another EU member state. VAT is due there, not in Germany.
- The invoice shows no tax: VAT rate 0 % per line item (BR-AE-05, BR-IC-05), tax amount 0.00 (BR-AE-09, BR-IC-09), gross equals net.
- Exactly one VAT breakdown of the category (BR-AE-01, BR-IC-01) with the exemption reason as code (BT-121) or text (BT-120) (BR-AE-10, BR-IC-10).
- A mandatory note in the invoice text and an entry in the EC Sales List (Zusammenfassende Meldung, § 18a UStG).
Differences:
| Reverse charge | Intra-community supply | |
|---|---|---|
| Supply | Service to a business | Goods that reach another EU member state |
| VAT treatment | Taxable, but the customer owes the tax | Exempt; the customer pays VAT on the acquisition in their own country |
| Legal basis | § 3a(2), § 13b UStG; Art. 44, 196 EU VAT Directive | § 4 no. 1(b), § 6a UStG; Art. 138 EU VAT Directive |
| Note on the invoice | “Reverse charge” (“Steuerschuldnerschaft des Leistungsempfängers”, § 14a(1), (5) UStG) | Note on the tax exemption (§ 14(4) sentence 1 no. 8 UStG) |
| Category (BT-151, BT-118) | AE |
K |
| Exemption reason (BT-121) | VATEX-EU-AE |
VATEX-EU-IC |
| Seller identifier | VAT ID (BT-31), German tax number (Steuernummer, BT-32) or tax representative (BT-63) – BR-AE-02 | VAT ID (BT-31) or tax representative (BT-63), the tax number is not enough – BR-IC-02 |
| Buyer identifier | VAT ID (BT-48) or registration number (BT-47) | VAT ID (BT-48) mandatory |
| Date of supply | Not required by EN 16931 (but required by § 14 UStG) | Delivery date (BT-72) or invoicing period (BG-14) – BR-IC-11 |
| Delivery country (BT-80) | – | Mandatory – BR-IC-12 |
EN 16931 is more lenient with AE because the category also covers domestic cases under
§ 13b UStG, such as construction services. For a service to another EU member state,
§ 14a(1) UStG still requires the VAT IDs of both parties. Supplies to countries outside
the EU are exports and use category G.
The document
Musterlieferant GmbH in Germany supplies Musterfirma Austria GmbH with four centrifugal pumps at EUR 850.00 each, EUR 3,400.00 net in total. The goods go to the warehouse in Graz. Because the supply is exempt, the net amount is also the invoice amount. The profile is COMFORT (EN 16931).
1. Invoice header and mandatory note
An ordinary invoice (type 380). The note on the tax exemption is required;
as a note with the code TXD (tax information) it also appears in
the human-readable version.
FacturXInvoice invoice = FacturXInvoice.CreateInvoice(
invoiceNo: "R2025-0418",
invoiceDate: new DateTime(2025, 11, 3),
currency: CurrencyCodes.EUR);
invoice.Type = InvoiceType.Invoice; // BT-3: 380 = commercial invoice, no special type needed
invoice.ReferenceOrderNo = "PO-2025-119";
// Note on the tax exemption under § 14(4) sentence 1 no. 8 UStG
invoice.AddNote("Exempt intra-community supply.",
subjectCode: SubjectCodes.TXD);
Dim invoice As FacturXInvoice = FacturXInvoice.CreateInvoice(
invoiceNo:="R2025-0418",
invoiceDate:=New DateTime(2025, 11, 3),
currency:=CurrencyCodes.EUR)
invoice.Type = InvoiceType.Invoice ' BT-3: 380 = commercial invoice, no special type needed
invoice.ReferenceOrderNo = "PO-2025-119"
' Note on the tax exemption under § 14(4) sentence 1 no. 8 UStG
invoice.AddNote("Exempt intra-community supply.",
subjectCode:=SubjectCodes.TXD)
2. Seller and buyer
The parties are the same as for reverse charge. Here, however, there is no alternative to the two VAT IDs: a German tax number (BT-32) is not enough for the seller, and the buyer needs their VAT ID (BT-48) in every case.
// Seller (BG-4) in Germany with VAT ID (BT-31)
invoice.SetSeller(
name: "MUSTERLIEFERANT GMBH",
postcode: "99199",
city: "MUSTERHAUSEN",
street: "BAHNHOFSTRASSE 99",
country: CountryCodes.DE,
id: "549910");
invoice.SetSellerContact(
name: "Max Mustermann",
emailAddress: "max.mustermann@musterlieferant.de",
phoneno: "+49 932 431 500");
invoice.AddSellerTaxRegistration("DE123456788", TaxRegistrationSchemeID.VA);
// Buyer (BG-7) in Austria with VAT ID (BT-48)
invoice.SetBuyer(
name: "MUSTERFIRMA AUSTRIA GMBH",
postcode: "1010",
city: "WIEN",
street: "MUSTERGASSE 7",
country: CountryCodes.AT,
id: "009871");
invoice.AddBuyerTaxRegistration("ATU12345678", TaxRegistrationSchemeID.VA);
' Seller (BG-4) in Germany with VAT ID (BT-31)
invoice.SetSeller(
name:="MUSTERLIEFERANT GMBH",
postcode:="99199",
city:="MUSTERHAUSEN",
street:="BAHNHOFSTRASSE 99",
country:=CountryCodes.DE,
id:="549910")
invoice.SetSellerContact(
name:="Max Mustermann",
emailAddress:="max.mustermann@musterlieferant.de",
phoneno:="+49 932 431 500")
invoice.AddSellerTaxRegistration("DE123456788", TaxRegistrationSchemeID.VA)
' Buyer (BG-7) in Austria with VAT ID (BT-48)
invoice.SetBuyer(
name:="MUSTERFIRMA AUSTRIA GMBH",
postcode:="1010",
city:="WIEN",
street:="MUSTERGASSE 7",
country:=CountryCodes.AT,
id:="009871")
invoice.AddBuyerTaxRegistration("ATU12345678", TaxRegistrationSchemeID.VA)
3. Deliver-to address and delivery date
This is the real difference from reverse charge. The tax exemption depends on the goods leaving the country – which is why EN 16931 requires the delivery country and the time of delivery. If the deliver-to address is missing, the validator reports BR-IC-12, even though the buyer itself is based in Austria.
// Deliver-to address (BG-13): its country (BT-80) is mandatory (BR-IC-12).
// The goods go to the warehouse in Graz, not to the head office in Vienna.
invoice.ShipTo = new Party()
{
Name = "MUSTERFIRMA AUSTRIA GMBH, LAGER GRAZ",
Postcode = "8020",
Street = "LAGERSTRASSE 12",
City = "GRAZ",
Country = CountryCodes.AT
};
// Delivery date (BT-72) or invoicing period (BG-14) is mandatory (BR-IC-11).
invoice.ActualDeliveryDate = new DateTime(2025, 10, 29);
' Deliver-to address (BG-13): its country (BT-80) is mandatory (BR-IC-12).
' The goods go to the warehouse in Graz, not to the head office in Vienna.
invoice.ShipTo = New Party() With
{
.Name = "MUSTERFIRMA AUSTRIA GMBH, LAGER GRAZ",
.Postcode = "8020",
.Street = "LAGERSTRASSE 12",
.City = "GRAZ",
.Country = CountryCodes.AT
}
' Delivery date (BT-72) or invoicing period (BG-14) is mandatory (BR-IC-11).
invoice.ActualDeliveryDate = New DateTime(2025, 10, 29)
<ram:ApplicableHeaderTradeDelivery>
<ram:ShipToTradeParty>
<ram:Name>MUSTERFIRMA AUSTRIA GMBH, LAGER GRAZ</ram:Name>
<ram:PostalTradeAddress>
<ram:PostcodeCode>8020</ram:PostcodeCode>
<ram:LineOne>LAGERSTRASSE 12</ram:LineOne>
<ram:CityName>GRAZ</ram:CityName>
<ram:CountryID>AT</ram:CountryID>
</ram:PostalTradeAddress>
</ram:ShipToTradeParty>
<ram:ActualDeliverySupplyChainEvent>
<ram:OccurrenceDateTime>
<udt:DateTimeString format="102">20251029</udt:DateTimeString>
</ram:OccurrenceDateTime>
</ram:ActualDeliverySupplyChainEvent>
</ram:ApplicableHeaderTradeDelivery>
4. The line item
The category K is set on the line item (BT-151), together with the
VAT rate 0.
// 4 pieces × 850.00 = 3,400.00 – category K, VAT rate 0 % (BR-IC-05)
invoice.AddTradeLineItem(
name: "Centrifugal pump KP-200",
netUnitPrice: 850.00m,
grossUnitPrice: 850.00m,
unitCode: QuantityCodes.H87, // H87 = piece
billedQuantity: 4m,
lineTotalAmount: 3400.00m,
taxType: TaxTypes.VAT,
categoryCode: TaxCategoryCodes.K,
taxPercent: 0m);
' 4 pieces × 850.00 = 3,400.00 – category K, VAT rate 0 % (BR-IC-05)
invoice.AddTradeLineItem(
name:="Centrifugal pump KP-200",
netUnitPrice:=850D,
grossUnitPrice:=850D,
unitCode:=QuantityCodes.H87, ' H87 = piece
billedQuantity:=4D,
lineTotalAmount:=3400D,
taxType:=TaxTypes.VAT,
categoryCode:=TaxCategoryCodes.K,
taxPercent:=0D)
5. VAT
The breakdown (BG-23) combines all K line items. The exemption reason is mandatory; code and text together are clearest for the recipient.
// Exactly one K breakdown (BR-IC-01), tax amount 0.00 (BR-IC-09),
// exemption reason as code and text (BR-IC-10)
invoice.AddApplicableTradeTax(
basisAmount: 3400.00m,
percent: 0m,
taxAmount: 0.00m,
typeCode: TaxTypes.VAT,
categoryCode: TaxCategoryCodes.K,
exemptionReasonCode: TaxExemptionReasonCodes.VATEX_EU_IC, // BT-121
exemptionReason: "Intra-community supply"); // BT-120
' Exactly one K breakdown (BR-IC-01), tax amount 0.00 (BR-IC-09),
' exemption reason as code and text (BR-IC-10)
invoice.AddApplicableTradeTax(
basisAmount:=3400D,
percent:=0D,
taxAmount:=0D,
typeCode:=TaxTypes.VAT,
categoryCode:=TaxCategoryCodes.K,
exemptionReasonCode:=TaxExemptionReasonCodes.VATEX_EU_IC, ' BT-121
exemptionReason:="Intra-community supply") ' BT-120
6. Payment terms, totals and saving
Every invoice with a positive amount due needs payment terms (BR-CO-25), here as text and as a due date. Without VAT, the gross amount equals the net amount.
invoice.AddTradePaymentTerms(
description: "Payable within 30 days without deduction.",
dueDate: new DateTime(2025, 12, 3));
// No VAT: gross = net
invoice.SetTotals(
lineTotalAmount: 3400.00m, // BT-106
taxBasisAmount: 3400.00m, // BT-109
taxTotalAmount: 0.00m, // BT-110
grandTotalAmount: 3400.00m, // BT-112
duePayableAmount: 3400.00m); // BT-115
invoice.Save("IntraCommunitySupply.xml",
ZUGFeRDVersion.Version25,
Profile.Comfort,
ZUGFeRDFormats.CII);
invoice.AddTradePaymentTerms(
description:="Payable within 30 days without deduction.",
dueDate:=New DateTime(2025, 12, 3))
' No VAT: gross = net
invoice.SetTotals(
lineTotalAmount:=3400D, ' BT-106
taxBasisAmount:=3400D, ' BT-109
taxTotalAmount:=0D, ' BT-110
grandTotalAmount:=3400D, ' BT-112
duePayableAmount:=3400D) ' BT-115
invoice.Save("IntraCommunitySupply.xml",
ZUGFeRDVersion.Version25,
Profile.Comfort,
ZUGFeRDFormats.CII)
The same document can also be saved as XRechnung. It then needs the usual mandatory information there: business process (BT-23), the electronic addresses of seller and buyer (BT-34, BT-49) and the payment instructions (BG-16).
Whether the document complies with the rule set is checked by the validator – in the browser or directly from your code. Both, along with the detailed documentation, are available in the customer area; how to get there is described under Getting started.